You can help by commenting or suggesting your edit directly into the transcript. We'll review any changes before posting them. All comments are completely anonymous. For any comments that need a reply, consider emailing firstname.lastname@example.org.
We are experiencing playback issues from our video hosting provider. Please check back shortly.
3:32The Designer Launcher
3:30Using Designer User Interface
1:08About Communication Modes
2:23Using Find and Replace
3:00About Project Properties
Take topic challenge
About Communication Modes
Learn how to change the Designer's communication mode and discuss options. The default setting does not allow writing from the Designer to Tag or Database sources. There are three communication modes to choose from: Comm Off, Comm Read-Only, and Comm Read/Write.
Video recorded using: Ignition 7.7
Transcript(open in window)
[00:00] The Ignition Designer is a live designer, in that it will allow you to interact with live data and it even shows you realtime values. Now by default, in order to protect you from accidentally changing anything in the PLC, the designer is in read only mode. Now you can see there are three little icons up here. And if you go into project in the menu bar, you'll see those same three icons and you can see that one is communications off, one is read only, and one is read write. Now Ignition is going to start in read only. Like I said, in order to protect you from accidentally changing something. But you can come in here and change it to read write if you wanted to go and write down to a tag or to the database or something like that. You can also change in project properties on the designer to start in read write by default if you wanted to. Comm off means that it won't even read the data. And that will help minimize traffic of your network if you need to.